Trackpro TT1a Slot Car Tire Truer for 1:24, 1:32 and 1:43 Scale

The TT1A Slot Car Tire Truer is an all-in-one solution for effective tire truing and cleaning. It is engineered for 1:24, 1:32, and 1:43 scale slot cars and fully compatible with digital and analog systems.

User-Friendly Setup:  Simply place and lock the TT1A on your track, position your slot car so that the rear tires rest on the sanding disc or cleaning area, and control the power to your rear wheels using your speed controller.  It is very important that too much pressure is not applied to the car when sanding.  Also please make sure when sanding that the controller is not running at full speed, or for extended periods of time.  Doing either or both of these things could cause issues with the motor and/or chip.

Efficient Truing System:  Utilizes standard 5" PSA sanding discs for effective truing. The sanding disc plate can be rotated to extend the disc's life as it wears and features dual grit capability. By cutting the provided 180 and 220 grit sanding discs in half and attaching them to the plate, you can switch between grits to achieve the desired finish.

Lubrication and Dust Control:  Use the included squeeze bottle to apply droplets of water or isopropyl alcohol (IPA) to the sanding disc where the tires make contact. This lubrication helps reduce motor and gear strain, minimizes dust, and improves the truing process.

Versatile Cleaning:  The sanding disc plate flips to reveal a large cleaning area equipped with Velcro hook material for securing one of the four provided microfiber cleaning cloths. Apply water or IPA droplets to this area to act as a lubricant, suppress dust and enhance cleaning of your tires.

Canadian Made:  Developed and manufactured in Canada.

CONTENTS:   truer platform, 180 and 220 grit 5" PSA sanding discs, squeeze bottle, 4 microfiber cloths